GitSwarm-EE 2017.2-1 Documentation


Debugging Tips

Sometimes things don't work the way they should. Here are some tips on debugging issues out in production.

Mail not working

A common problem is that mails are not being sent for some reason. Suppose you configured an SMTP server, but you're not seeing mail delivered. Here's how to check the settings:

  1. Run a Rails console:

    sudo gitlab-rails console production

    or for source installs:

    bundle exec rails console production
  2. Look at the ActionMailer delivery_method to make sure it matches what you intended. If you configured SMTP, it should say :smtp. If you're using Sendmail, it should say :sendmail:

    irb(main):001:0> ActionMailer::Base.delivery_method
    => :smtp
  3. If you're using SMTP, check the mail settings:

    irb(main):002:0> ActionMailer::Base.smtp_settings
    => {:address=>"localhost", :port=>25, :domain=>"localhost.localdomain", :user_name=>nil, :password=>nil, :authentication=>nil, :enable_starttls_auto=>true}```

    In the example above, the SMTP server is configured for the local machine. If this is intended, you may need to check your local mail logs (e.g. /var/log/mail.log) for more details.

  4. Send a test message via the console.

    irb(main):003:0> Notify.test_email('[email protected]', 'Hello World', 'This is a test message').deliver_now

    If you do not receive an e-mail and/or see an error message, then check your mail server settings.

Advanced Issues

For more advanced issues, gdb is a must-have tool for debugging issues.

The GNU Project Debugger (gdb)

To install on Ubuntu/Debian:

sudo apt-get install gdb

On CentOS:

sudo yum install gdb

Common Problems

Many of the tips to diagnose issues below apply to many different situations. We'll use one concrete example to illustrate what you can do to learn what is going wrong.

502 Gateway Timeout after unicorn spins at 100% CPU

This error occurs when the Web server times out (default: 60 s) after not hearing back from the unicorn worker. If the CPU spins to 100% while this in progress, there may be something taking longer than it should.

To fix this issue, we first need to figure out what is happening. The following tips are only recommended if you do NOT mind users being affected by downtime. Otherwise skip to the next section.

  1. Load the problematic URL
  2. Run sudo gdb -p <PID> to attach to the unicorn process.
  3. In the gdb window, type:

    call (void) rb_backtrace()
  4. This forces the process to generate a Ruby backtrace. Check /var/log/gitlab/unicorn/unicorn_stderr.log for the backtace. For example, you may see:

    from /opt/gitlab/embedded/service/gitlab-rails/lib/gitlab/metrics/sampler.rb:33:in `block in start'
    from /opt/gitlab/embedded/service/gitlab-rails/lib/gitlab/metrics/sampler.rb:33:in `loop'
    from /opt/gitlab/embedded/service/gitlab-rails/lib/gitlab/metrics/sampler.rb:36:in `block (2 levels) in start'
    from /opt/gitlab/embedded/service/gitlab-rails/lib/gitlab/metrics/sampler.rb:44:in `sample'
    from /opt/gitlab/embedded/service/gitlab-rails/lib/gitlab/metrics/sampler.rb:68:in `sample_objects'
    from /opt/gitlab/embedded/service/gitlab-rails/lib/gitlab/metrics/sampler.rb:68:in `each_with_object'
    from /opt/gitlab/embedded/service/gitlab-rails/lib/gitlab/metrics/sampler.rb:68:in `each'
    from /opt/gitlab/embedded/service/gitlab-rails/lib/gitlab/metrics/sampler.rb:69:in `block in sample_objects'
    from /opt/gitlab/embedded/service/gitlab-rails/lib/gitlab/metrics/sampler.rb:69:in `name'
  5. To see the current threads, run:

    thread apply all bt
  6. Once you're done debugging with gdb, be sure to detach from the process and exit:

    detach
    exit

Note that if the unicorn process terminates before you are able to run these commands, gdb will report an error. To buy more time, you can always raise the Unicorn timeout. For omnibus users, you can edit /etc/gitlab/gitlab.rb and increase it from 60 seconds to 300:

unicorn['worker_timeout'] = 300

For source installations, edit config/unicorn.rb.

Reconfigure GitLab for the changes to take effect.

Troubleshooting without affecting other users

The previous section attached to a running unicorn process, and this may have undesirable effects for users trying to access GitLab during this time. If you are concerned about affecting others during a production system, you can run a separate Rails process to debug the issue:

  1. Log in to your GitLab account.
  2. Copy the URL that is causing problems (e.g. https://gitlab.com/ABC).
  3. Obtain the private token for your user (Profile Settings -> Account).
  4. Bring up the GitLab Rails console. For omnibus users, run:

    sudo gitlab-rails console
  5. At the Rails console, run:

    [1] pry(main)> app.get '<URL FROM STEP 2>/?private_token=<TOKEN FROM STEP 3>'

    For example:

    [1] pry(main)> app.get 'https://gitlab.com/gitlab-org/gitlab-ce/issues/1?private_token=123456'
  6. In a new window, run top. It should show this ruby process using 100% CPU. Write down the PID.
  7. Follow step 2 from the previous section on using gdb.

More information