Perforce 2001.1 System Administrator's Guide
<< Previous Chapter
Customizing Perforce:
Job Specifications

Table of Contents
Index
Perforce on the Web
Next Chapter >>
Tuning Perforce for Performance

Chapter 6
Scripting Perforce:
Daemons and Triggers

User-written scripts can enhance Perforce's functionality. There are three primary methods of scripting Perforce:

This chapter assumes that you know how to write scripts.

Triggers

Warning!

Although Perforce commands that only read data from the depot can be called in a trigger script, running Perforce commands that write data to the depot is dangerous and should be avoided. In particular, do not run the p4 submit command from within a trigger script.


A pre-submit trigger is a script called by Perforce when files that you've specified have been submitted. If the script exits with status 0, the submit continues. If it exits with a nonzero status, the submit fails. In the event of failure, the script's standard output is displayed as part of the error message returned to the user by the failed submit.

Triggers can be useful in many situations. Consider the following common uses:

Triggers are created and edited with p4 triggers. Only the Perforce superuser can run this command. The p4 triggers form looks like this:

Triggers:
        relnotes_check  //depot/bld/...   "perl relcheck.pl %user%"
        verify_jobs     //depot/...       "python /usr/bin/job.py %change%"

Each line in the trigger table has three fields:

Field
Meaning

Trigger Name

The name of the trigger. The name can be any arbitrary string.

File Specification

A file specification in depot syntax. If a changelist contains any files that match this specification, the script will be run.

Multiple file specifications can be linked to the same trigger by listing the trigger multiple times in the trigger table.

Script

The command that Perforce should run when a matching file is submitted.

The submit will continue if the trigger script exits with 0, and fail otherwise.

The script must be specified in a way that allows the Perforce server account to find the file. You can place the directory of the script in the PATH of the environment in which p4d is running, or specify the full path name of the script within the trigger table.

This command should be quoted, and can take any or all of a number of variables as parameters. The most useful of these variables are:

  • %user%, which provides the Perforce name of the user who submitted the changelist;
  • %changelist%, (also abbreviated as %change%), the number of the changelist that's being submitted; and
  • %client%, the name of the client workspace from which the submit was run.

Using triggers

Triggers are run in the order entered in the triggers table.

If you have multiple triggers associated with a file pattern, each will be run in the order in which it appears in the triggers table. If one of these triggers fails, no further triggers are executed.

If you have multiple filepatterns triggering the same script, you should create multiple triggers with separate names pointing to the same script. This is due to a limitation of Perforce.

Some trigger scripts need to know the files that are included in the changelist. Since p4d can only pass 1K of data to a trigger script, the file list can't be passed via the trigger. Use p4 opened -ac changelist# in your trigger scripts to get the list of files for the changelist number provided as an argument. The actual contents of the files are not accessible from within the trigger script, since the files are not stored in the depot until the submit completes.

Before p4 submit runs the trigger script, it creates the changelist, assigns it a number, and locks the files in the changelist. After a trigger script completes, p4 submit may run subsequent trigger scripts that cause the submit to fail. For this reason, trigger scripts should not take any actions that assume the submit will succeed. Trigger scripts are meant primarily for changelist validation; if you need to take particular actions based on the success of a submit, use a daemon.

Note

In order to use triggers, the server (p4d) must be able to "fork", or spawn off processes to run the triggers. This is the default configuration of Perforce.

If you invoke p4d with the -f (run in foreground without forking) option, however, you will not be able to use triggers until you restart the server without the -f option.

Triggers and security

Warning!

Because triggers are spawned by the p4d process, p4d should never be run as root on UNIX systems.

Triggers and Windows

By default, the Perforce service runs under the Windows local System account.

Because Windows requires a real account name and password to access files on a network drive, if the trigger script resides on a network drive, you must configure the service to use a real userid and password to access the script.

For details, see "Installing the Perforce service on a network drive" on page 106.

Daemons


Daemons are processes that are called periodically or run continuously in the background. Daemons that use Perforce usually work by examining the server metadata as often as needed and taking action as often as necessary. Typical daemon applications include:

Daemons can be used for almost any task that needs to occur when Perforce metadata has changed. Unlike triggers, which are used primarily for submission validation, daemons can also be used to write information (that is, submit files) to a depot.

Perforce's change review daemon

The change review daemon described above can be downloaded from http://www.perforce.com/perforce/loadsupp.html. It runs under Python, which can be retrieved from http://www.python.org/. Before running the script, please be sure to read and follow the configuration instructions included in the script itself.

The change review daemon looks at the files included in each newly submitted changelist and emails those users who have "subscribed" to any of the files included in the changelist, letting those users know that the file(s) they're interested in have changed. Users subscribe to files by calling p4 user and entering filepatterns in the Reviews: field of the resulting form:

User:     sarahm
Email:    [email protected]
Update:   1997/04/29 11:52:08
Access:   1997/04/29 11:52:08
FullName: Sarah MacLonnogan
Reviews:
        //depot/doc/...
        //depot.../README

Users should enter their email addresses in the Email: field, and enter any number of filepatterns corresponding to the files in which they're interested into the Reviews: field. The daemon reports changes to these files to the users.

The change review daemon implements the following scheme:

  1. p4 counter is used to read and change a variable, called a counter, in the Perforce metadata. The counter used by this daemon, review, stores the number of the latest changelist that's been reviewed.

  2. The Perforce depot is polled for submitted, unreviewed changelists with the p4 review -t review command.

  3. p4 reviews generates a list of reviewers for each of these changelists.

  4. The Python mail module mails the p4 describe changelist description to each reviewer.

  5. The first three steps are repeated every three minutes, or at some other interval configured the time of installation.

The command used in the fourth step (p4 describe) is a straightforward reporting command. The other commands (p4 review, p4 reviews, and p4 counter) are used almost exclusively by review daemons.

Creating other daemons

You can use p4review.py as a starting point to create your own daemons, changing it as needed. As an example, another daemon might upload Perforce job information into an external bug tracking system after changelist submission. It would use the p4 review command with a new review counter to list new changelists, and use p4 fixes to get the list of jobs fixed by the newly submitted changelists. This information might then be fed to the external system, notifying it that certain jobs have been completed.

If you write a daemon of your own and would like to share it with other users, you can submit it into the Perforce Public Depot. For more information, go to http://www.perforce.com and follow the "Perforce Public Depot" link.

Commands used by daemons

Certain Perforce commands are used almost exclusively by review daemons.

These commands are:

Command
Usage

p4 counter name [value]

When a value argument is not included, p4 counter returns the value of the variable name.

When a value argument appears, p4 counter sets the value of the variable name to value.

Requires at least review access to run.

WARNING: The review counters named journal, job, and change are used internally by Perforce; use of any of these three names as review numbers could corrupt the Perforce database.

For Release 99.2 and above, Perforce will not let you change the values of journal, job, and change.

p4 counters

List all counters and their values.

p4 review -c changelist#

For all changelists between changelist# and the latest submitted changelist, this command lists the changelists' numbers, creators, and creators' email addresses.

Requires at least review access to run.

p4 reviews -c changelist# filespec

Lists all users who have subscribed to review the named files or any files in the specified changelist.

It is hard to imagine any use for this command outside of our own change review daemon.

p4 changes -m 1 -s submitted

Output a single line showing the changelist number of the last submitted changelist, as opposed to the highest changelist number known to the Perforce server.

Daemons and counters

If you're writing a change review daemon or other daemon that deals with submitted changelists, you may also wish to keep track of the changelist number of the last submitted changelist, which is the second field in the output of a p4 changes -m 1 -s submitted command.

This is not the same as the output of p4 counter change. The last changelist number known to the Perforce server (the output of p4 counter change) includes pending changelists created by users, but not yet submitted to the depot.

Scripting and buffering

Depending on your platform, the output of individual p4 commands may be fully-buffered (output flushed only after a given number of bytes generated), line-buffered (as on a tty, one line sent per linefeed), or unbuffered.

In general, stdout to a file or pipe is fully-buffered, and stdout to a tty is line-buffered. If your trigger or daemon requires line-buffering (or no buffering), you can disable buffering by supplying the -v0 debug flag to the p4 command in question.

If you're using pipes to transfer standard output from a Perforce command (with or without the -v0 flag), you may also experience buffering issues introduced by the kernel, as the -v0 flag can only unbuffer the output of the command itself.


Perforce 2001.1 System Administrator's Guide
<< Previous Chapter
Customizing Perforce:
Job Specifications

Table of Contents
Index
Perforce on the Web
Next Chapter >>
Tuning Perforce for Performance
Please send comments and questions about this manual to [email protected].
Copyright 1999-2001 Perforce Software. All rights reserved.
Last updated: 10/03/01