p4 submit


Commit a pending changelist and the files it contains to the depot.


p4 [g-opts] submit [-r -s] [-f submitoption] [--noretransfer 0|1]
p4 [g-opts] submit [-r -s] [-f submitoptionfile …
p4 [g-opts] submit [-r] [-f submitoption] -d description
p4 [g-opts] submit [-r] [-f submitoption] -d description file …
p4 [g-opts] submit [-r] [-f submitoption] [--noretransfer 0|1] -c change
p4 [g-opts] submit -e shelvedchange
p4 [g-opts] submit -i [-r -s] [-f submitoption] --parallel=threads=N[,batch=N][,min=N]


When a file has been opened by p4 add, p4 edit, p4 delete, or p4 integrate, the file is listed in a changelist. The user's changes to the file are made only within in the client workspace copy until the changelist is sent to the depot with p4 submit.

By default, files are opened within the default changelist, but you can also create new numbered changelists with p4 change.

  • To submit the default changelist, use p4 submit.

  • To submit a numbered changelist, use p4 submit -c changelist.

    Using the -c option also allows you to change the description information for a numbered changelist.

By default, all files in the changelist are submitted to the depot, and files open for edit, add, and branch are closed when submitted, whether there are any changes to the files or not. To change this default behavior, set the SubmitOptions: field in the p4 client form for your workspace. To override your workspace's SubmitOptions: setting from the command line, use p4 submit -f submitoption.

When used with the default changelist, p4 submit brings up a form for editing in the editor defined by the EDITOR (or P4EDITOR) environment variable. Files can be deleted from the changelist by deleting them from the form, but these files will remain open in the next default changelist. To close a file and remove it from all changelists, use p4 revert.

All changelists have a Status: field; the value of this field is pending or submitted. Submitted changelists have been successfully submitted with p4 submit; pending changelists have been created by the user but not yet been submitted successfully.

To supply a changelist description from the command line, use the -d option. No change description dialog is presented. The -d option works only with the default changelist, not with numbered changelists.

A file's location in the depot is determined by its location in the local filesystem and by the client workspace definition, which is specified in the p4 client form. See "Refining Workspace Views" in the P4 User's Guide for more information.

Submit processing

p4 submit works atomically: either all the files listed in the changelist are saved in the depot, or none of them are. The atomic nature of p4 submit allows files to be grouped in a changelists according to their purpose. For example, a single changelist might contain changes to three files that fix a single bug. p4 submit fails if it is interrupted, or if any of the files in the changelist are not found in the current client workspace, are locked in another client workspace (with p4 lock), or require resolution and remain unresolved.

A progress indicator is available for p4 submit if you request it with p4 -I submit.

Before committing a changelist, p4 submit briefly locks all files being submitted. If any file cannot be locked or submitted, the files are left open in a numbered pending changelist. By default, the files in a failed submit operation are left locked unless the submit.unlocklocked configurable is set. Files are unlocked even if they were manually locked prior to submit if submit fails when submit.unlocklocked is set.

If p4 submit fails while processing the default changelist, the changelist is assigned the next number in the changelist sequence, and the default changelist is emptied. The changelist that failed submission must be resubmitted by number after the problems are fixed.

If p4 submit fails, some or all of the files might have been copied to the server. By default, retrying a failed submit transfers all these files again unless the submit.noretransfer configurable is set, in which case the server attempts to detect if the files have already been transferred and does not re-transfer all files when retrying a failed submit. You can use the --noretransfer option to override the submit.noretransfer configurable and allow the user to choose the preferred re-transfer behavior for the current submit operation.

Parallel submits

You can transfer files in parallel during the submit process. If there are sufficient resources, a submit command might execute more rapidly by transferring multiple files in parallel. For this feature to work, you must have both server and client upgraded to version 2015.1. Please read this section in its entirety to make sure that you are using this feature appropriately.

To enable parallel submits, set the net.parallel.max configurable.

  • Specify threads=N to request that files be sent concurrrently using the specified number of independent network connections. The threads grab work in batches. You specify batch=N to control the number of files in a batch.

    A submit that is too small will not initiate parallel file transfers. Specify min=N to control the minimum number of files in a parallel submit.

  • Parallel submits from an edge server to a commit server use standard pull threads to transfer the files. The administrator must ensure that pull threads can be run on the commit server by doing the following:

    • Makes sure that the service user used by the commit server is logged into the edge server.

    • Make sure the ExternalAddress field of the edge server's server spec is set to the address that will be used by the commit server's pull threads to connect to the edge server.

      If the commit and edge servers communicate on a network separate from the network used by clients to communicate with the edge server, the ExternalAddress field must specify the network that is used for connections from the commit server. Furthermore, the edge server must listen on the two (or more) networks.

  • The --parallel option is ignored when the archives are shared, for p4 submit -e, and when progress indicators are used.

Using parallel submits improves performance in cases like the following:

  • Significant network latency exists somewhere along the path through which the submitted file content travels from the client to the repository where the file content is stored.

    This includes significant network latency between a Proxy and Server, or between an Edge Server and a Commit Server. When using parallel submit in such a configuration, the inherent TCP delays related to network latency occur concurrently, rather than sequentially when not using parallel submit.

  • Significant resources are required during the transfer of the submitted file, and those resources are available.

    For example, if significant CPU cycles are required to compress ctext or binary file content as it is transferred from a client to a server, the compression of the file content can occur on one CPU core per parallel submit thread compressing either a ctext or binary file, so long as there are enough available CPU cores.

In other cases, using parallel submit might not result in significant performance benefits:

  • In some environments, network bandwidth can be a precious resource.

    If network latency is minimal, it might not take many parallel submit threads to use the available network bandwidth. Once the available network bandwidth is used, adding parallel submit threads might not improve performance. This is especially true when transferring file content for which only network bandwidth resources are needed, such as when transferring ubinary files.

  • Using a small value for the batch and min arguments specified with the --parallel option is only practical in some cases.

    For example, if a small number of large ctext or binary files are submitted using parallel submit, transferring a small number of files per parallel submit thread can result in the best performance, provided that adequate CPU and network bandwidth resources are available. In order for parallel submit to transfer an evenly-distributed number of files over the number of parallel submit threads specified (which defaults to four), the batch argument might need to be set to a value lower than its default of eight. (For example, if submitting eight large ctext or binary files using four parallel submit threads, the batch argument should be set to two.) And it follows that the value for the min argument, which defaults to nine, should be set to less than or equal to the number of large ctext or binary files being submitted.

    On the other hand, using a small value for the batch argument can degrade performance when submitting many small files using parallel submit. The overhead of the server frequently querying db.sendq for each batch by each parallel submit thread can result in db.sendq concurrency issues. This is because as the size of the files submitted using parallel submit decreases, the more frequently the server queries db.sendq for the next batch processed by a parallel submit thread.

Form Fields

Field Name





The change number, or new if submitting the default changelist.



Name of current client workspace.



Name of current Perforce user.


Read-only, value

One of pending, submitted, or new. Not editable by the user.

The status is new when the changelist is created; pending when it has been created but has not yet been submitted to the depot with p4 submit, and submitted when its contents have been stored in the depot with p4 submit.



Textual description of changelist. This value must be changed.



A list of jobs that are fixed by this changelist. This field does not appear if there are no relevant jobs.

Any job that meets the jobview criteria as specified on the p4 user form are listed here by default, but can be deleted from this list.


Writable, value

Type of change: restricted or public.

A restricted shelved or committed changelist denies access to users who do not own the changelist and who do not have list permission to at least one file in the changelist. A restricted pending (unshelved) changelist denies access to non-owners of the changelist. Public changes are displayed without these restrictions.



A list of files being submitted in this changelist. Files can be deleted from this list, but cannot be changed or added.


-c change

Submit changelist number change.

Changelists are assigned numbers either manually by the user with p4 change, or automatically by Perforce when submission of the default changelist fails.

-d description

Immediately submit the default changelist with the description supplied on the command line, and bypass the interactive form. This option is useful when scripting, but does not allow for jobs to be added, nor for the default changelist to be modified.

-e shelvedchange

Submit shelved changelist number shelvedchange.

The -e option submits a shelved changelist without transferring files or modifying the workspace. The shelved change must be owned by the person submitting the change, but the workspace may be different. Files shelved to a stream target may only be submitted by a stream workspace that is mapped to the target stream. In addition, files shelved to a non-stream target cannot be submitted by a stream workspace.

To submit a shelved change, all files in the shelved change must be up to date and resolved. No files may be open in any workspace at the same change number. Your p4 client form's SubmitOptions: settings (revertunchanged, etc) are ignored. If the submit is successful, the shelved change and files and are no longer available to be unshelved or submitted.

This is the only submit option supported for files with propagating attributes from an edge server in a distributed environment.

-f submitoption

Override the SubmitOptions: setting in the p4 client form. Valid submitoption values are:

  • submitunchanged

    All open files (with or without changes) are submitted to the depot. This is the default behavior of Perforce.

  • submitunchanged+reopen

    All open files (with or without changes) are submitted to the depot, and all files are automatically reopened in the default changelist.

  • revertunchanged

    Only those files with content or type changes are submitted to the depot. Unchanged files are reverted.

  • revertunchanged+reopen

    Only those files with content or type changes are submitted to the depot and reopened in the default changelist. Unchanged files are reverted and not reopened in the default changelist.

  • leaveunchanged

    Only those files with content or type changes are submitted to the depot. Any unchanged files are moved to the default changelist.

  • leaveunchanged+reopen

    Only those files with content or type changes are submitted to the depot. Unchanged files are moved to the default changelist, and changed files are reopened in the default changelist. This option is similar to submitunchanged+reopen, except that no unchanged files are submitted to the depot.


Read a changelist specification from standard input. Input must be in the same format as that used by the p4 submit form.

--noretransfer 0|1

Set to 1 to have the server avoid re-transferring files that have already been archived after a failed submit operation; set to 0 to have the server retransfer all files after a failed submit operation. This setting overrides the setting of the submit.noretransfer configurable for the current submit operation.


Specify options for parallel file transfer. The configuration variable net.parallel.max must be set to a value greater than 1 to enable the --parallel option.

  • threads=n sends files concurrently using n independent network connections. The specified threads grab work in batches.

  • batch=n specifies the number of files in a batch.

  • min=n specifies the minimum number of files in a parallel sync. A sync that is too small will not initiate parallel file transfers.

See Parallel processing for more information.


Reopen files for edit in the default changelist after submission. Files opened for add or edit in will remain open after the submit has completed.


Allows jobs to be assigned arbitrary status values on submission of the changelist, rather than the default status of closed. To leave a job unchanged, use the special status of same.

On new changelists, the fix status is displayed as the special status ignore. (If the status is left unchanged, the job is not fixed by the submission of the changelist.)

This option works in conjunction with the -s option to p4 fix, and is intended for use in conjunction with defect tracking systems.


This file pattern parameter can only be used when submitting a default changelist. The files in the default changelist that match the specified pattern are submitted. Files that don't match the file pattern are moved to the next default changelist.


See “Global Options”.

Usage Notes

Can File Arguments Use Revision Specifier?

Can File Arguments Use Revision Range?

Minimal Access Level Required





p4 submit

Submit the default changelist. The user's revisions of the files in this changelist are stored in the depot.

p4 submit -c 41

Submit changelist 41.

p4 submit *.txt

Submit only those files in the default changelist that have a suffix of .txt. Move all the other files in the default changelist to the next default changelist.

p4 submit -d "header files" *.h

Submit only those files in the default changelist that have a suffix of .h, with a description of header files. No changelist form is displayed. Move all the other files in the default changelist to the next default changelist.

Related Commands

To create a new, numbered changelist

p4 change

To open a file in a client workspace and list it in a changelist

To move a file from one changelist to another

p4 reopen

To remove a file from all changelists, reverting it to its previous state

p4 revert

To view a list of changelists that meet particular criteria

p4 changes

To read a full description of a particular changelist

p4 describe

To read files from the depot into the client workspace

p4 sync

To edit the mappings between files in the client workspace and files in the depot

p4 client